Owner
OwnerDIY Zigbee motion detection sensor (PIR)
Inductive water meter and full integration into HA
PZEM-004
RFID
Z1-Mini cookbook
4x DS18B20 temperature sensors in HA
Zigbee Roller & Venetian blinds automation
Zigbee capacitive soil moisture sensor
2-channel battery-powered counter (Russian)
Rebooting device remotely
PCF8583 counter
Zigbee + LCD 16×4 + Sensors (Advanced)
MG90S servo motor control
CSRLabs
This is my energy monitor project based on PZEM-004T and EBYTE CC2652RB module with a standard DIN rail enclosure, designed to work with Home Assistant ZHA.
https://csrlabs.io/diy-zigbee-energy-monitor-based-on-pzem-004t.html
Doublet
I recently converted my weatherstation to 100% Zigbee and is now integrated into Home assistant: https://community.home-assistant.io/t/diy-zigbee-weather-station/378652
Jimi
Is there any setting in firmware to use it with battery or it’s ok to use it just as normal configuring to work on battery?
Owner
The “PSM” firmware type means “Power Saving Mode” for battery devices.
Doublet
Just created a PTVO powered Zigbee inductive water meter and full integration into HA : https://community.home-assistant.io/t/diy-inductive-zigbee-water-meter/304402.
Giovanni
Hi, i added other usage examples in my board site. If you want you can link it here:
https://gio-dot.github.io/Z1-Mini/
Owner
Thank you!
Juan
Hi dear!
I have just programmed a Flow Water YF-s201 like a Pulse detector.
It works, but not fine.
i feel it loss a lot of pulses.
Could you help me how to make this config?
Owner
Sorry, but I do not have this device for tests.