DIY examples

authorOwner
16th February, 2021

Zigbee Hobbyist. Rock Pi 4 SBC

DIY examples

authorOwner
16th February, 2021

DIY Zigbee motion detection sensor (PIR)
Inductive water meter and full integration into HA
PZEM-004
RFID
Z1-Mini cookbook
4x DS18B20 temperature sensors in HA
Zigbee Roller & Venetian blinds automation
Zigbee capacitive soil moisture sensor
2-channel battery-powered counter (Russian)
Rebooting device remotely
PCF8583 counter
Zigbee + LCD 16×4 + Sensors (Advanced)
MG90S servo motor control

No related posts.

Comments
Harvey Specter
Posted at 21:05 February 22, 2023
CSRLabs
Reply
Author

This is my energy monitor project based on PZEM-004T and EBYTE CC2652RB module with a standard DIN rail enclosure, designed to work with Home Assistant ZHA.

https://csrlabs.io/diy-zigbee-energy-monitor-based-on-pzem-004t.html

Harvey Specter
Posted at 09:16 January 12, 2022
Doublet
Reply
Author

I recently converted my weatherstation to 100% Zigbee and is now integrated into Home assistant: https://community.home-assistant.io/t/diy-zigbee-weather-station/378652

Harvey Specter
Posted at 07:22 June 17, 2021
Jimi
Reply
Author

Is there any setting in firmware to use it with battery or it’s ok to use it just as normal configuring to work on battery?

    Harvey Specter
    Posted at 07:57 June 17, 2021
    Owner
    Reply
    Author

    The “PSM” firmware type means “Power Saving Mode” for battery devices.

Harvey Specter
Posted at 19:04 May 1, 2021
Doublet
Reply
Author

Just created a PTVO powered Zigbee inductive water meter and full integration into HA : https://community.home-assistant.io/t/diy-inductive-zigbee-water-meter/304402.

Harvey Specter
Posted at 15:41 April 29, 2021
Giovanni
Reply
Author

Hi, i added other usage examples in my board site. If you want you can link it here:
https://gio-dot.github.io/Z1-Mini/

    Harvey Specter
    Posted at 06:25 May 1, 2021
    Owner
    Reply
    Author

    Thank you!

Leave a Reply to Jimi
Cancel Reply

Navigation