CC2652R1, CC2652RB, CC2652P, CC1352P2 configurable router firmware

It is the next generation of Zigbee chips from Texas Instruments. The main advantage of these chips over CC2530 or CC2531 is the better radio part. It provides better signal strength with lower power consumption. You’ll have great LQI characteristics with these routers. CC2652P or CC1352P2 have a built-in radio amplifier. They beat everything in the world 😊 🔥.

Examples

Launchpads with build-in debugger and flasher

LAUNCHXL-CC26X2R1 (Texas Instruments, AliExpress)
LAUNCHXL-CC1352P-2 (Texas Instruments, AliExpress)

Boards without a flasher

⚠️ Note: you should purchase a J-Link V8 (JTAG), J-Link V9, or XDS110 compatible debugging probe to flash firmware to these boards.

EBYTE E79-900DM2005S (CC1352P, external antenna)
RF-star RF-BM-2652P2 (CC2652R or CC2652P, built-in or external antenna).
CC2652 (USB stick, external antenna)

Notes:

  1. These boards require a power supply with stable output current (200mA). Double-check cheap Chinese power sources.
  2. Double-check the distance between pins or pin pads. For example, the EBYTE board has 1.27 mm between pins. It is very hard to solder.
CC2652P-based router
CC2652P-based router

Download firmware

You can download the latest version of my firmware here. The ZIP package contains presets for LAUNCHXL-CC26X2R1. Of course, you can adjust the settings as you want.


Comments
Harvey Specter
Posted at 09:56 October 10, 2021
gio
Reply
Author

Hi, in firmwares for cc2652P, transmission power is set to +20dBm?

    Harvey Specter
    Posted at 11:40 October 10, 2021
    Owner
    Reply
    Author

    Yes, the firmware sets the maximum output power.

Leave a Reply to Owner
Cancel Reply