Custom firmware for Gledopto GL-S007Z

It is Zigbee 5W GU10 Bulb with RGB+CCT LEDs. The lamp has a good design and characteristics, but it has only one small disadvantage. It does not save and restore the last state after power outage.

For example, it can light while you are on vacation for two weeks or wake-up you at midnight.

So, I’ve adjusted and tested the PTVO firmware to work on this and other bulbs based on the CC2530 chip.

⚠️ THIS FEATURE REQUIRES THE PREMIUM VERSION

Firmware settings for Gledopto GL-S007Z
Firmware settings for Gledopto GL-S007Z

In Zigbee2mqtt, it looks similarly to a device with the manufacturer’s firmware.

Zigbee2Mqtt device properties
Zigbee2Mqtt device properties

Of course, Zigbee2Mqtt can add the necessary objects and controls to HomeAssistant if you use it.

Zigbee2Mqtt device controls
Zigbee2Mqtt device controls

There are no comments.

Leave a Reply