The premium version has the same features as the free version, plus:

  • It allows you to define 16 GPIO inputs or outputs (for example, you may define 8 GPIO outputs and 8 external sensors, or 16 GPIO outputs for relays).
  • It allows you to create battery-powered DIY devices with effective power management.
  • PCF8583 counter, PCA9685 multichannel PWM.
  • 5 hardware built-in PWM, in contrast to 4 PWM in the free version.
  • Hardware PWM with low frequencies.
  • LED features: WS2812B strips or multichannel color LED lamps.
  • DS3221 Real-time clock.
  • CRON scheduler.
  • Keypad (matrix keyboard).
  • Flower / Soil moisture sensor.

I plan to add new features and sensor types to the premium version.

1 device

6.95 USD

(without local taxes)

Get Premium

3 devices

5.95 USD / device

(without local taxes)

Get Premium

6 devices

3.95 USD / device

(without local taxes)

Get Premium

Do you have a DIY blog or DIY project that you want to share to the public? We can discuss a custom premium version for your project. Email me: ptvo {at} ptvo.info.

Note:

  1. The premium firmware is linked to a device. If you’ve purchased it for one device and requested firmware one time, you cannot move it later to another device. You can install all further updates on the same device.
  2. I cannot guarantee that the firmware will work in all configurations and schematics, but I’ll make all efforts to fix bugs and resolve issues. If you are not sure the firmware can work for you, please, test the free version first.
  3. To the maximum extent permitted by applicable law, the firmware, and documentation are provided “AS IS.” I disclaim all other warranties and conditions, either express or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose, conformance with description, title, and non-infringement of third-party rights.
Premium version interface
Premium version interface

Comments
Harvey Specter
Posted at 12:38 November 3, 2024
trilu
Reply
Author

Does your firmware support IR receive and send ?
And can i use devices with ZHA in Homeassistant?

    Harvey Specter
    Posted at 13:09 November 6, 2024
    Owner
    Reply
    Author

    No. It does not support IR at all.

Harvey Specter
Posted at 05:58 August 6, 2024
JohnRob
Reply
Author

I plan on using the premium PWM function to generate 4 (or 5) PWM outputs all at 240Hz. I’m hoping I can modify each PWM dutycycle independently with a ZHA interface.
My question has to do with the premium license (I have an unused one). Can I install that license on a CC2530 board and use it as a test unit to develop my code? This would mean I might change the above to the LED options instead of controllable PWM.
I would then install an new license on a new board and install the above developed code. Is this possible with the current licensing system?
Thanks
JohnRob

    Harvey Specter
    Posted at 06:54 August 6, 2024
    Owner
    Reply
    Author

    No problems, you can try any configurations on the same device without any limitations.

Harvey Specter
Posted at 04:47 May 4, 2024
JohnRob
Reply
Author

Hi:
I’m using a few free versions and am working on setting up my first Premium version. I have to say your offering your very flexible free version is extremely kind of you and I for one very much appreciate it. As for the Premium, you license fee is so small it shouldn’t even be a subject of discussion. In addition, your spending time to answer users questions is simply wonderful. Those who complain do not have their priorities straight.

I do have a question regarding the premium version. I don’t have the target board up and running so I’ve only tried the “FirmwareConfig.exe” without saving anything (so no license has been entered).

My question is: I want to run on battery power. I could not find any entries that might define the off time. I’m thinking the off time could be defined and the board would sleep for that time, wake up, power up the sensor (SI7021) delay a bit while the sensor stabilizes. Take or receive a reading, send a Zigbee message and go back to sleep.
Am I off track here?
Thanks
John

    Harvey Specter
    Posted at 12:22 May 4, 2024
    Owner
    Reply
    Author

    John, thank you for your feedback! Yes, it is the standard behavior of the PSM firmware type. The device wake-ups only when it sends a periodic report. This interval you can define on the “Expert” tab.

Harvey Specter
Posted at 07:50 December 18, 2023
AUTRET JJACQUES
Reply
Author

Hello, thank you for your answer but I don’t understand the subtlety of the answer. If the activation key is linked to the zigbee device and it breaks down, what prevents me from reflashing it with the application on a new disk or the old one?

    Harvey Specter
    Posted at 08:20 December 18, 2023
    Owner
    Reply
    Author

    I’ve meant a broken Zigbee device in my answer.

Harvey Specter
Posted at 07:39 December 17, 2023
AUTRET JJACQUES
Reply
Author

Hello, a comment and a question regarding the premium version. The price is not what is indicated because there are taxes to add (20%). The premium version seems attached to the machine, what happens if we have a disk crash?

    Harvey Specter
    Posted at 06:01 December 18, 2023
    Owner
    Reply
    Author

    1. Thank you for your note, I clearly state that the price on this page does not include local taxes because they are different in every country.
    2. The premium version is linked to a Zigbee device (not a computer). So, a disk crash is not a problem. Just save the activation code in a safe place. But if your _Zigbee_ device will break, you’ll need a new license key.

Harvey Specter
Posted at 19:20 November 6, 2023
Rob
Reply
Author

Hello, Why do i have to pay per device for the premium version? As far as i can see you are not doing anything extra for it. It’s still up to me to configure it. Because now if the module dies I’m out a licence.
I’d rather just give you 30 bucks and have unlimited devices with no support. Is this to try and stop people from selling preconfigured modules without having to write the code by hand? Also the premium version requires the internet for every time it wants to save the file? That’s even more stupid.

    Harvey Specter
    Posted at 03:50 November 7, 2023
    Owner
    Reply
    Author

    Rob, thank you for your feedback! I’ve added some premium features described on this page. If you’ve found a bug and expect my assistance, you can always submit a report on Github where we can discuss it.

Harvey Specter
Posted at 18:39 October 26, 2023
Pawel
Reply
Author

Hi. Is this project alive? Could i buy premium version?

    Harvey Specter
    Posted at 03:28 October 27, 2023
    Owner
    Reply
    Author

    Yes, the project is alive.

Harvey Specter
Posted at 08:46 October 23, 2023
RaNo
Reply
Author

Hi. It says “5 hardware built-in PWM apart from of 4 PWM in the free version”, but I think it should say “instead of” and not “apart from”. With the “apart from” wording it seems as in the premium version we could have a total of 9 PWM at once.

    Harvey Specter
    Posted at 12:02 October 23, 2023
    Owner
    Reply
    Author

    Thank you! Changed.

Harvey Specter
Posted at 20:59 October 13, 2023
Resistance is Useless
Reply
Author

Hi, very useful little program you’ve produced – many thanks; I bought the premium version as I was impressed. I’m trying to setup a Home Assistant weather station based on this;
https://community.home-assistant.io/t/diy-zigbee-weather-station/378652
FYI, I use Linux and ptvo runs in the Wine windows emulator – there are a couple of minor errors but click through and it works ok.
Unfortunately, the TI SmartRf programmer loads, but Wine cannot easily access hardware ports in Linux so it can’t be used.
Luckily there is a Linux cmd line programmer called cc-tool which works perfectly with my SmartRf04EB https://sourceforge.net/projects/cctool/
Hope this may be useful for someone else.

    Harvey Specter
    Posted at 08:12 October 14, 2023
    Owner
    Reply
    Author

    Thank you for your feedback!

Harvey Specter
Posted at 22:07 September 22, 2023
Nikita
Reply
Author

Hi, thank you for this great software!

Today, I’ve tried to use it with some basics – I’ve created config with:
– one input P00, GPIO, Pull-down, link to out 1, switch, bind command “on/off
– output 1, P30, GPIO, Role Contact
It works great.

Now I wonder, I need to add 15 contact sensors on one device, how can I do it? If I understood correctly, to get a state of a contact I have to create one input, link it to output and select Role Contact for that output, but I face issues with that PTVO has only 29 total pins (with virtual 30-37 pins) so, even, if I create 15 inputs, I have only 14 pins left.., and btw, only first 8 output pins have “role” dropdown.. so what about other 8?

Along with that, even I’ve read all the comments here, and understood, that for me to have 10 similar devices with same firmware I have to pay for 10 licences, I don’t quite understood how is it working. I thought that I need to buy licence only if I need to use premium features.

So questions:
1. What configuration do I need to have in z2m 16 contact sensors? Do I need premium licence in order for it to work?
2. If it is possible somehow to make (Quesion1) work without using only 15 inputs, can I also connect temperature sensor as one last input?
3. Why one licence is bind to one device? Could you, please, explain how is it working? I mean, what will happen, if I program two devices with one hex file generated by ptvo?

P.S. I’m using E18-2G4Z27SI for testing (generating for CC2530+CC2592) and planning to use E18-MS1 (for all other 10 devices). Is it right choice, or I should use another board for this to be implemented?

    Harvey Specter
    Posted at 03:39 September 25, 2023
    Owner
    Reply
    Author

    Hi Nikita,
    0. I’ve verified the latest version. It allows selecting a role for all 16 outputs.
    1. Yes, you need the premium version for 16 channels.
    2. Yes, you can add a temperature sensor too.
    3. Each device has a unique ID. The license will be tied to this ID when you save a firmware with your configuration.

Harvey Specter
Posted at 03:54 September 8, 2023
Michael
Reply
Author

Hello,
i find your site and read everything.
if i understand everything correct, your firmware is a kind of general firmware.
similar to the “Tasmota”-Firmware available for the ESP-devices. Is this correct?

In the configurator i can setup everything. IEEE, Zigbee-Parameter, the desired functions on the GPIO-pins. (Eg. two GPIO acting as switch).

Then i can flash this firmware right away on a 100% new “ebyte E18” (CC2530), without further action?
Or is there a kind of “basic” firmware, i have to flash first?

And what firmware(s) i use best for the E18-MS1. I want mainly the endpoint functions.

When the flash is done the E18 is 100% ready to join a Zigbee-net ?
It is ready to use the configured functions and exposing them neccessary Endpoints/Entities etc. needed for Zigbee2Mqtt in Homeassistant ?

Regards Michael

    Harvey Specter
    Posted at 07:47 September 8, 2023
    Owner
    Reply
    Author

    Yes, you can get Ebyte E18 and write the configured firmware to it. After this, the device should connect to any Zigbee network.

Harvey Specter
Posted at 17:45 September 1, 2023
Klaus
Reply
Author

Hi,
will it work to create a zigbee smart meter reader with such a board, your firmware and an IR-Reader like this https://www.ebay.de/itm/125077162292?mkcid=16&mkevt=1&mkrid=707-127634-2357-0&ssspo=fb9jjuttsbe&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY ?

    Harvey Specter
    Posted at 07:43 September 8, 2023
    Owner
    Reply
    Author

    No, the firmware cannot read data from smart meters.

    Harvey Specter
    Posted at 07:44 September 8, 2023
    Owner
    Reply
    Author

    The firmware cannot read data from smart meters.

Harvey Specter
Posted at 08:38 July 24, 2023
Locy
Reply
Author

Please tell me, does the construct support the creation of devices with powe_on_behavior?

    Harvey Specter
    Posted at 09:24 July 24, 2023
    Owner
    Reply
    Author

    The firmware can restore the last state of a GPIO output and for some sensors.

Harvey Specter
Posted at 18:53 May 18, 2023
shiba8324
Reply
Author

Can I use the IEEE address that Z2M shows to licence a device?
Arduino with CCLoader works fine for me, getting a CC debugger just for the IEEE address seems a bit wasteful.
Thank you 😀

    Harvey Specter
    Posted at 07:01 May 19, 2023
    Owner
    Reply
    Author

    Yes, you can take the IEEE address from Z2M.

Harvey Specter
Posted at 17:22 May 15, 2023
Marco
Reply
Author

Hi, the free version can read 16 input?

Thank You
Marco

    Harvey Specter
    Posted at 05:48 May 16, 2023
    Owner
    Reply
    Author

    Hi Marco! No, the free version allows you to use 8 inputs and 8 outputs only.

Harvey Specter
Posted at 06:25 May 11, 2023
DMS
Reply
Author

Hi! Prompt IEEE can be taken from the column “IEEE Address” in “Zigbee2MQTT” (Home Assistant) ?

Harvey Specter
Posted at 17:37 May 9, 2023
Claude
Reply
Author

Hello,
if I understand correctly, the free version is not able to simultaneously operate 4 ADC inputs with 8 GPIO outputs ?
Regards

    Harvey Specter
    Posted at 03:24 May 10, 2023
    Owner
    Reply
    Author

    No, the free version also allows you to add 4 ADC on inputs, but you cannot use additional parameters (shift & scale).

Harvey Specter
Posted at 21:05 April 1, 2023
Radoslav
Reply
Author

Hello,
if I want to use CC2531 as router with ability to switch only 4 GPIO as outputs (P0.4-P0.7
and 4 GPIOS as input (P1.4-P1.7) , it is enabled in free version ?

    Harvey Specter
    Posted at 11:48 April 2, 2023
    Owner
    Reply
    Author

    You do not need the Premium version for this functionality.

Harvey Specter
Posted at 07:29 November 8, 2022
Tinfoil Hat
Reply
Author

Hi, is there any other way to pay than PayPro Global?

Their reviews are somewhat mixed when I checked, no other reason than being a bit of a “tinfoil hat” myself 🙂

    Harvey Specter
    Posted at 07:46 November 8, 2022
    Owner
    Reply
    Author

    Hi. PayProGlobal works well :). They accept PayPal if you prefer a safer transaction. Otherwise, you can buy me some coffee (the link on the right side), email me to ptvo _at_ ptvo _dot_ info. But it will take more time.

      Harvey Specter
      Posted at 08:03 November 8, 2022
      Tinfoil Hat
      Reply
      Author

      Ok, thank you for a fast reply!

    Harvey Specter
    Posted at 15:04 March 20, 2023
    hasspi
    Reply
    Author

    Is there a discord channel?

      Harvey Specter
      Posted at 03:26 March 23, 2023
      Owner
      Reply
      Author

      No, I do not have a discord channel.

Harvey Specter
Posted at 15:44 October 23, 2022
Goridat
Reply
Author

I am using firmware version 1.7.2.0 on an CC2530 in PSM mode. It is configured to poll for queued commands every 5 seconds, and I have disabled resetting of the device by a power on/off cycle. I am using zigbee2mqtt on home assistant as coordinator. Everything works as expected for a couple of days but eventually the device will stop reporting the sensor values and stops responding to commands. Power cycling it does not help but if I read the flash using the flash programmer and compare it to the original file it reports “Verify against file OK”. If I then read the flash into a file and program the chip with this exact file, remove the device from zigbe2mqtt and repair it, it works again for a couple of days until it fails again eventually. I do not know where to look next for possible problems. Do you have an idea?

    Harvey Specter
    Posted at 08:44 October 24, 2022
    Owner
    Reply
    Author

    Sorry, but I don’t have ideas. This problem may appear for many reasons. Could you please submit a new issue on GitHub and add more info (your firmware configuration, coordinator type).

Harvey Specter
Posted at 16:15 August 27, 2022
Vladislav
Reply
Author

How do I know the IEEE of the E72-2G4M20S1E module? Connected via J-Link V9 (J-Link itself was normally installed and after the launch of J-link Commander, the firmware of the programmer was updated), the UniFlash module does not see. How to firmware this module? Paid for 3 devices.

    Harvey Specter
    Posted at 23:39 August 27, 2022
    Owner
    Reply
    Author

    UniFlash or Flash Programmer v2 can successfully read IEEE from these modules. If you cannot read from the chip, try to erase or mass erase it first.

      Harvey Specter
      Posted at 07:21 August 28, 2022
      Vladislav
      Reply
      Author

      Flash Programmer v2 issues an error and closes.
      “SBL: Unable to open COM7. Error: 1.
      Connecting over serial bootloader failed: SBL: Unable to open COM7. Error: 1.”
      Yesterday I made a free version of the firmware for checking the programmer, everything went through J-Flash…
      Through the SN written on the module, can you find out IEEE?

        Harvey Specter
        Posted at 07:16 August 31, 2022
        Owner
        Reply
        Author

        You should flash a firmware or read IEEE using the jtag mode not SBL.

          Harvey Specter
          Posted at 09:39 September 1, 2022
          Vladislav
          Author

          I understood this, but I did not find the necessary settings. Uniflash automatically searches – does not find, there is no J-link programmer in the settings. Flash Programmer v2 defines the j-link programmer, but I did not find how to enable JTAG mode. I already did on E18 MS1-PCB modules, but I would like to use E72. For CC2530 there is a good instruction, for CC2652 this would be…

Harvey Specter
Posted at 08:47 August 17, 2022
Francesco
Reply
Author

Hello,
Great job. I’d like to build an IR remote controller powered by battery to manage a Velux window: PTVO supports this features? Thank you

    Harvey Specter
    Posted at 10:17 August 17, 2022
    Owner
    Reply
    Author

    Hi! Sorry, but the firmware can’t generate IR signals.

Harvey Specter
Posted at 02:08 August 10, 2022
Anatoly
Reply
Author

I think I can answer my own question after reading your site. Your standard version firmware allows to read analog inputs which are native to CC2530 chip. Nice! Will get the hardware and try.

Harvey Specter
Posted at 16:38 August 3, 2022
Gorid
Reply
Author

I use the PSM function with a CC2530 to control a battery powered device. Is there a way to pulse a pin once on boot up of the device? I would need this to initialize an SR latch with which the CC2530 controls power to the main part of the project.

    Harvey Specter
    Posted at 03:32 August 5, 2022
    Owner
    Reply
    Author

    I can only offer a workaround. You can add a bistable relay (remember state: off, restore last state: off). This relay type has two signals: ON and OFF. You can use any virtual pin for the ON signal. The firmware will send a short OFF pulse when the firmware starts.

      Harvey Specter
      Posted at 16:54 August 6, 2022
      Gorid
      Reply
      Author

      Thank you!

Harvey Specter
Posted at 18:00 July 31, 2022
Vladislav
Reply
Author

Hi!
I need a device for separate control of 8 LED tapes based on CC2652P. The description says that only 5 can be used (in the premium version), but the configurator does not issue an error if I make 8 outputs with hardware PWM. Will this configuration work properly?

    Harvey Specter
    Posted at 04:33 August 1, 2022
    Owner
    Reply
    Author

    No, this configuration will not work. You can only use 5 PWM channels. I would recommend splitting this device to two independent devices or use an external PWM controller like PCA9685 (https://ptvo.info/zigbee-configurable-firmware-features/external-sensors/16-channel-zigbee-pwm-controller-pca9685/)

      Harvey Specter
      Posted at 13:43 August 1, 2022
      Vladislav
      Reply
      Author

      When using the PCA9685 and E72-2G4M20S1E module (CC2652P), can I connect and separately control the brightness of up to 15 white LED tapes inclusive? And when the tape is turned on, there will be a smooth increase in brightness?

        Harvey Specter
        Posted at 03:56 August 2, 2022
        Owner
        Reply
        Author

        No, you can only control 8 PWM outputs on PCA9685. Yes, the firmware support smooth transitions with this board too, as for the regular PWM output.

          Harvey Specter
          Posted at 14:09 August 2, 2022
          Vladislav
          Author

          The link describing the settings for PCA9685 uses 7 PCA9685 PWM outputs, you write about 8. You can take a screenshot for an example with 8 PCA9685 PWM outputs enabled. And can I add 2 DS18B20 temperature sensors to this? Is the limit on the number of PWM outputs for a module on the CC2652P hardware or software?

          Harvey Specter
          Posted at 03:28 August 3, 2022
          Owner
          Author

          The Premium version can have up to 16 outputs. 8 outputs can be allocated for external or internal sensors. You can have 8 PWM channels or 6 PWM channels and 2 DS18B20.
          It is the software limit in my firmware.

Harvey Specter
Posted at 13:40 May 14, 2022
RaNo
Reply
Author

Could you add an option for the 16 channel version to work as a router?

    Harvey Specter
    Posted at 09:23 May 20, 2022
    Owner
    Reply
    Author

    Sorry, but there is no free memory for all features.

    Harvey Specter
    Posted at 18:00 June 30, 2022
    Theo
    Reply
    Author

    How do I get a premium firmware. I ordered and paid for a 6 license key via PayPro.
    I got a download link for a premium version, but it is still the normal version.
    Also got “a sort of” test license key from PayPro, but do not know where to put it..
    can you help me out..
    Regards, Theo

      Harvey Specter
      Posted at 03:51 July 1, 2022
      Owner
      Reply
      Author

      Thank you for your order! The program will ask you it when you save a firmware with premium features, for example, the PSM version.

        Harvey Specter
        Posted at 09:29 July 2, 2022
        Owner
        Reply
        Author

        I can confirm a bug in the firmware. It didn’t use the “k*65536” part in calculation. I’ll resolve this problem in the next version.

Harvey Specter
Posted at 16:44 May 12, 2022
Mirek
Reply
Author

Does the software support the BMP680 sensor? And is there any possibility for the device to support an LCD display?

    Harvey Specter
    Posted at 03:39 May 13, 2022
    Owner
    Reply
    Author

    The firmware does not support BMO680 and LCD displays.

Harvey Specter
Posted at 16:00 May 9, 2022
RaNo
Reply
Author

Hi. Will the premium version still work after you retire? 🙂

Is there a threat that your servers will stop validating IEEE addresses when generating our firmware? Can you commit yourself to make the premium version available free of charge if you ever decide to stop the validation service?

    Harvey Specter
    Posted at 06:19 May 10, 2022
    Owner
    Reply
    Author

    I hope I will live forever :). In theory, I can share the unlimited version in this case.

      Harvey Specter
      Posted at 11:21 May 10, 2022
      RaNo
      Reply
      Author

      Thanks! Long live! 🙂

Harvey Specter
Posted at 17:04 May 6, 2022
Dan
Reply
Author

Hi This project is nice. But very Pricey.
I am trying to build my own Lux sensor : Price E18 : 3 EUR / PCB / 3 EUR OTHERS COMPONENT 3 EUR / CASE + BATERY 3 EUR + YOUR FIRM COST 7 EUR -> 19EUR
on shelf LUX ZIGBEE Market cost 15 EUR….

    Harvey Specter
    Posted at 08:03 May 7, 2022
    Owner
    Reply
    Author

    Hi Dan.
    Yes, of course! A DIY device always cost more than a mass market device. You can save 7 EUR and make your firmware using the free SDK.

      Harvey Specter
      Posted at 15:14 May 11, 2022
      RaNo
      Reply
      Author

      Mmm, let me try it actually 🙂 Which of the sample projects is a good start?

        Harvey Specter
        Posted at 03:41 May 12, 2022
        Owner
        Reply
        Author

        All SDK contain several examples. You can start with a general example.

Harvey Specter
Posted at 15:44 January 15, 2022
Rolo
Reply
Author

Hi, I have a temperature sensor running on a CC2530 module, bought the PSM licence for it. It works fine but I would like to know if the HTU21D sensor is in sleep mode between the reports.
Datasheet say’s it’s sleep current is 0,02 uA and when measuring it’s 450 uA, that makes a big difference in battery life.
Thanks.

Harvey Specter
Posted at 15:22 January 15, 2022
Ed
Reply
Author

Am I reading the premium licensing correctly, that I need a separate license for each device I deploy the firmware to? Like If I’m making a custom zigbee sensor for my home, and I intend to flash/deploy 10 of these, I need to pay $3.95 for EACH device? Please tell me I’m reading that wrong. That pricing model is astronomically expensive.

    Harvey Specter
    Posted at 06:31 January 16, 2022
    Owner
    Reply
    Author

    Yes, you need 10 licenses for 10 devices. Could you please name your price for 10 devices?

Harvey Specter
Posted at 12:13 December 24, 2021
Mike
Reply
Author

Hello,
can I use your FW with servo motors? Or DC motors? or steppers?

Thank you.

Merry Xmas!

    Harvey Specter
    Posted at 12:29 December 24, 2021
    Owner
    Reply
    Author

    Merry Xmas!

    It depends on your hardware. I know some users can control motors by a PWM output.

Harvey Specter
Posted at 03:32 September 4, 2021
ngd
Reply
Author

I am in Vietnam, can I buy it? .6 devices is like. I do not understand.Can you help me explain?

    Harvey Specter
    Posted at 06:11 September 4, 2021
    Owner
    Reply
    Author

    No problems if you have a bank card like Visa or Mastercard. Click the “Get premium” button and place your order online.

Harvey Specter
Posted at 10:42 August 6, 2021
Dieter
Reply
Author

Hello, I am very happy to see, that you have managed to build PSM. I reckon, also the pricing is fair to get started. My question: Can I build a device that sleeps, will be woken up by a radio based command, controls a gpio and falls back to sleep. In other simple words, a remotly controlled “relais”. Is this possible with 4uAmps standby? Thanks for your input

    Harvey Specter
    Posted at 10:49 August 6, 2021
    Owner
    Reply
    Author

    Hello,

    Please, note it is not true sleep because the device should wake up, enable radio and check for commands.
    You should enable the “Poll for queued commands” option on the “Expert” tab. Power consumption depends on the interval. Average consumption will be more than 4uA.

      Harvey Specter
      Posted at 07:28 August 7, 2021
      Dieter
      Reply
      Author

      Makes sense. Can the HW “queue”/receive commands while deep sleeping, or only when awake (I assume around 20mA)? In other words, would I miss a command, while deep sleeping?
      Would you mind, putting up a screenhot of the “Expert” tab?

        Harvey Specter
        Posted at 07:40 August 7, 2021
        Owner
        Reply
        Author

        The device cannot receive anything in the sleep mode because the radio is off. You should not miss a command because a coordinator or router should hold these commands for some time (note, some routers do not support this mode).

          Harvey Specter
          Posted at 12:16 August 7, 2021
          Dieter
          Author

          Understood. So how is e.g. the IKEA FYRTUR blind achieving this? It runs on 2 18560 Cells (~6Ah) almost 160 days with 2 motor cycles of ~15sec a day (maybe 4-5Ah). There is not much energy left for a 24×7 monitoring (say 0,5mA avg.). That would be a ratio of 1:100 with 4uA sleep. If I press the zigbee remote, it feels it reacts instantaniously. I guess less then 200ms delay. Reading your post, I would have to poll with this frequency (4-5times per second). Could I sleep so short inbetween to get an avg consumption of 0,5 mA?. Wat would be the timings for wake-up? Do you have data for this? Is there a different mode/profile in ZigBee to achieve this? Thanks heaps, Dieter

          Harvey Specter
          Posted at 17:16 August 7, 2021
          Owner
          Author

          Please, look here:
          https://ptvo.info/zigbee-configurable-firmware-features/power-saving-mode/cc2530-power-consumption-in-psm/
          Maybe, you can get more info on how it works and calculate a battery lifetime in your case.

          Harvey Specter
          Posted at 09:30 August 8, 2021
          Dieter
          Author

          Ok, thanks for your patience and input 🙂 It helps me lots to find the right direction. Really last question now: You state 30ua per 120s with “polling” every 5 sec. Would I be in the right ballpark, if I wake up for queue reading every 1 sec.–> 5 x as often. The consumption would be in the order of 5 x 30uA = 150uA for 120s or 75uA/sec.

          Harvey Specter
          Posted at 09:49 August 8, 2021
          Owner
          Author

          Yes, if you poll every second, power consumption increases 5x times (5 x 30uA = 150uA).

Harvey Specter
Posted at 00:07 July 24, 2021
luca
Reply
Author

is it possible to connect a temperature sensor and a display?

    Harvey Specter
    Posted at 09:28 July 25, 2021
    Owner
    Reply
    Author

    Hi! The firmware does not support any displays.

Harvey Specter
Posted at 00:36 July 2, 2021
JohnRob
Reply
Author

Hi, Love your program(s).
I wish to purchase a single premium license to get started. However I am now in the “collecting parts” mode. If I purchase the license now but don’t use it for 2 months is there an issue?

I guess I don’t know the procedure for loading the firmware to a single board. Is it part of the firmware configuration program, a license entered somewhere or do I need to send you the ID of the target board?

Thanks
JohnRob

    Harvey Specter
    Posted at 04:29 July 2, 2021
    Owner
    Reply
    Author

    Hi.
    1. The license will never expire.
    2. The firmware configuration program will ask you about the license code when you save a firmware with premium featutes.

Harvey Specter
Posted at 11:40 May 12, 2021
Scheusal
Reply
Author

I want to create a battery powered remote, to have a universal remote for my home automation.
1.does the firmware support an input matrix, lets say 4×4 (16 Buttons) ?
(sure i can just use 16 separate inputs or link every button to a specific pin combination afterwards but thats not convenient).
2. what about the PSM in such a configuration? will it be able to wake up from sleep with a press of any button?

thanks

    Harvey Specter
    Posted at 06:21 May 13, 2021
    Owner
    Reply
    Author

    1. The firmware does not support a button matrix.
    2. Yes, the firmware can wake up when you press a _single_ button.
    Look at the following project: https://github.com/diyruz/freepad/

Harvey Specter
Posted at 09:13 April 24, 2021
Giovanni C
Reply
Author

Hello, can you clarify the premium fee ?
If I’ve 3 identical devices will I need to buy 3 times the firmware or just one time and install it in the 3 identical devices?

    Harvey Specter
    Posted at 09:46 April 24, 2021
    Owner
    Reply
    Author

    You need 3 licenses for 3 devices with any configuration, identical or not.

Harvey Specter
Posted at 22:38 March 31, 2021
JohnRob
Reply
Author

One more question regarding low power operation:
Do the configurations for the supported sensors utilize the sensor’s low power mode?
Most concern to me are:
1) BME280
2) BH1721
3) One wire DS18B20 ( I guess this would simply be the standby mode)

Thanks
John

    Harvey Specter
    Posted at 03:44 April 1, 2021
    Owner
    Reply
    Author

    You can control the power source of all sensors with P10 and P11 pins. So, they will wake up only when needed.

Harvey Specter
Posted at 20:22 March 31, 2021
Shawn
Reply
Author

Interested in PSM but have a couple questions. If we don’t have an external interrupt is there a way to have the device sleep for say 1 hour, take a reading, send data, and then sleep again? Also have a question about using GPIO for power. If I pull one of the 20ma GPIO to high to provide power to a sensor can this set the GPIO to low before sleeping to save power?

Harvey Specter
Posted at 15:17 March 31, 2021
Yusuf
Reply
Author

I wrote earlier and mentioned the sleep low-power mode requirement. You have now added it and turned it into a commercial business model. Congratulations. I will contact you directly later for the high volume production regarding the price. But first, I want to quickly produce a prototype evk and test and measure it. I could not see the memory requirement for firmware, how much flash size is required minimum. I will design for CC2530Fxxx as per the requirement. Also, do you have any notes to warn before drawing? Especially for low-power design.

    Harvey Specter
    Posted at 03:38 April 1, 2021
    Owner
    Reply
    Author

    Hi. The firmware is compiled for CC2530F256. I’m sorry, but I’m not a hardware engineer. My suggestions are obvious. Use low-power external components and sensors.

Harvey Specter
Posted at 06:19 March 31, 2021
JohnRob
Reply
Author

John:
I’ve been waiting for the ability to make batter powered devices. I’m going to guess that there is some kind of serial number in the cc2530 which you can limit the use of a limit the use of that version of your firmware. Assuming this is how it will function, will I be able to massively change the function of this one unit under the original license. lets assume i’m dropping one senor for a newer sensor. And you now deed to add several voltage measurements.
This all has changed the function of the device but it is still using the original2530 board.

Am I on the right track here?

    Harvey Specter
    Posted at 06:58 March 31, 2021
    Owner
    Reply
    Author

    Hi,
    Yes, each CC2530 board has a unique serial number (the IEEE address). You can install my premium firmware on a chip with that serial number an unlimited number of times with any configurations. Of course, you can install other firmware on that chip too. Later, you can return to my firmware and install it again.

Harvey Specter
Posted at 15:04 March 28, 2021
Mariusz
Reply
Author

Hi, is it possible to have 7 input pins ans 11 output? May I use pins P07, P10, P11, P21, P22?

    Harvey Specter
    Posted at 04:37 March 29, 2021
    Owner
    Reply
    Author

    Hi. Yes, it is possible in the Premium version. You may use these pins (P07, P10, P11) on CC2530 without an amplifier.

      Harvey Specter
      Posted at 06:57 March 29, 2021
      Mariusz
      Reply
      Author

      What about P21, P22? Do you know any problems with using those as input/output?
      I’m having trouble with software/hardware that I don’t know the reason for. Using the MS1PA1 module (and not using P10, P11) CC2530 keeps restarting after a few seconds – but when I use any of the inputs (which causes the output toggle) the problem disappears. It looks like it’s rebooting until the first input is received. After turning it off / on, the problem returns.

      P.S. Any bigger discount on 20 licenses?

        Harvey Specter
        Posted at 07:40 March 29, 2021
        Owner
        Reply
        Author

        There are no problems with P21, P22. Please, try to disable Input 1.

Harvey Specter
Posted at 16:25 March 23, 2021
Ken Petersen
Reply
Author

Hi

I have developed a home automation device based on the Zwave Z-Uno module, that is very easy to program, also for a hardware engineer as me 😉
I found you firmware here for the Zigbee CC2530 circuit.
I want to mature my product for production, so it is not for DIY use.
I want to ask you some question, if you are interested in develop and supplying firmware for us, if we change to CC2530 series chips.
We are not able to make software for Zigbee communication, only for the application on top, we are not software engineers.
If interested, please reply to my email, and I will describe the project.

    Harvey Specter
    Posted at 03:39 March 24, 2021
    Owner
    Reply
    Author

    Hi, I’ve answered in an email.

Harvey Specter
Posted at 07:45 March 23, 2021
Damian
Reply
Author

I want to build battery powered impulse counter (for electric consuption based on blinking LED) – do I need premium version for it? What is difference in power menagment in free vs premium version?

    Harvey Specter
    Posted at 08:29 March 23, 2021
    Owner
    Reply
    Author

    The free version does not use power management and consumes about 8-28 mA. The premium version has the power-saving mode and consumes about 4 uA in the sleep mode. If your impulses are frequent, you don’t need the power-saving mode because the chip never sleeps.

      Harvey Specter
      Posted at 11:46 March 23, 2021
      Damian
      Reply
      Author

      OK, thanks for that information… So I see that my device will last on planned battery (CR2032) just one day if I calculate it right… Impulse frequency is 6400 impulses for 1kWh… Typically in my consumption about 1 impulse per second… I think I need to plan bigger battery 🙂

        Harvey Specter
        Posted at 13:57 March 23, 2021
        Owner
        Reply
        Author

        I think you can use a constant power source if you calculate electrical energy.

          Harvey Specter
          Posted at 14:30 March 23, 2021
          Damian
          Author

          Unfortunately no… All in box is sealed, only impulse LED is visible, no possibility to connect to power source there… One more question – if I’ll use paid version with PSM and disable “wait for command” feature it should wake just when impulse received and sleeps immediately after? And it will wake each 60s to send report? If yes – it maybe can be acceptable with some bigger batteries than CR2032…

Harvey Specter
Posted at 09:09 March 7, 2021
Filip
Reply
Author

Maybe some (even one-time) discount for folks that donated you before? 🙂

While I do love Your firmware, highly appreciate Your hard work and time invested into this product, and I also recommend your firmware many times on my local community; 7€ price tag per device is little bit too high for me, personally. (I use only 1-2 inputs/outputs and that’s it, but I would want to try out the power saving feature.)
However, I’ve donated you to before and even suggested using Buy Me A Coffee 🙂

Maybe there’s a potential to provide demo mode (just to test out features and compatibility)? E.g. firmware that will work for only one week, or demo configurator with access to the premium features, but with limit of 1-2 features to be used at once.

    Harvey Specter
    Posted at 10:11 March 7, 2021
    Owner
    Reply
    Author

    Hi!
    Yes, of course. I’ve sent you a key via email.

      Harvey Specter
      Posted at 16:00 March 8, 2021
      Filip
      Reply
      Author

      Thanks man! <3

Harvey Specter
Posted at 00:58 March 7, 2021
Joseph
Reply
Author

Can I use your project commercially?

    Harvey Specter
    Posted at 10:13 March 7, 2021
    Owner
    Reply
    Author

    You can use my firmware commercially. But keep in mind, I can only provide limited support, and the firmware provided “AS-IS.”

Harvey Specter
Posted at 08:25 March 6, 2021
MICKAEL
Reply
Author

Hi

How do you plan to manage the breakdowns?
This is DIY. During tests I destroyed 3 x IC E18-MS1-PCB.
I think you should plan in Premium an unlimited version in order to be able to replace the ICs destroyed during prototyping or handling error.

    Harvey Specter
    Posted at 15:01 March 6, 2021
    Owner
    Reply
    Author

    Sorry, but I cannot manage breakdowns. You’ll lose a license for that device. Unfortunately, I don’t see a way to control an unlimited license too. Could you offer your variant?

Harvey Specter
Posted at 09:10 March 4, 2021
Sergei
Reply
Author

200 Russian rubles is too expensive. It is easier then to buy the final device.

    Harvey Specter
    Posted at 09:50 March 4, 2021
    Owner
    Reply
    Author

    Yes, of course. Any DIY will be more expensive than a mass-device because you make your personal effort on it. I suppose, your time costs more. Or you may compile your firmware yourself. There are many examples on the web.

    Harvey Specter
    Posted at 08:02 March 29, 2021
    Mariusz
    Reply
    Author

    I think there is no comparable solution on the mass market. Besides, the prices are quite reasonable in my opinion. Note that the volume of potential sales is a limited but non-trivial amount of work done.

      Harvey Specter
      Posted at 08:06 March 29, 2021
      Owner
      Reply
      Author

      Thank you :). I’ve started this project as a hobby. I hope, it may help more people.

Leave a Reply to shiba8324
Cancel Reply