Navigation
ARCHIVE: May, 2019

CC2530 + CC2590/CC2591/CC2592/RFX2401 routers

Nowadays, some manufacturers offer boards with additional power amplifiers for the radio signal. These boards may cover a rather large area than the regular CC2530. The standard router firmware does not work with these boards.

Example: EBYTE E18-MS1PA1-IPX

Therefore I’ve prepared particular versions:

http://ptvo.info/wp-content/uploads/2018/09/cc2530_cc2590_1.2.2a.44539_firmware.zip
http://ptvo.info/wp-content/uploads/2018/09/cc2530_cc2591_1.2.2a.44539_firmware.zip
http://ptvo.info/wp-content/uploads/2018/09/cc2530_cc2592_1.2.2a.44539_firmware.zip

The RFX2401 power amplifier has wiring identical to CC2590. Please, use the firmware for cc2530 + cc2590.

Your comments are welcome!

Notes:

  1. These boards require a power supply with stable high output current (500mA). Double check cheap Chinese power sources.
  2. Double check the distance between pins or pin pads. For example, EBYTE board has 1.27 mm between pins. It is very hard to solder.
There are no more results.